New and improved features
Features below were firstly introduced or significantly improved in this release:
- The program now supports Microsoft Windows 10 build 1903
- The program can work with mail servers that require TLS 1.1 and TLS 1.2 encryption
↧
EMCO Ping Monitor 6.3.2 is available
↧
EMCO Ping Monitor 7.0 is available
System state overview
There is a new view in the program that provides you with an overview of the current state of the monitored hosts. There you can see the number of the monitored, non-monitored and paused hosts. The same view shows the total number of the monitored hosts in different states (Up and Down) and with a different connection quality (Good, Warning, Bad and Critical). All numbers are clickable, so you can navigate to the hosts with the selected Activity, State or Quality.
Connection quality tracking
In addition to the host state monitoring, the program can now monitor the connection quality for the monitored hosts, so you can see it on screen and get notifications when the connection quality changes. The connection quality is determined using the packet loss, latency percentile and jitter metrics to show the quality as Good, Warning, Bad or Critical.
State and quality monitors
Using the State and Quality Monitors, which are available in the Enterprise edition of the program, you can see the states and the connection quality of all the monitored hosts on a single screen. Those views are designed for control rooms where the monitored hosts should be represented in a compact form while their state and quality are displayed by means of different colors. It is possible to sort and filter the displayed data to show hosts with the required characteristics only.
Determining the host performance and displaying statistics for a selected period
You can select the required period and get information on the host performance and statistics for the selected period. The host performance is determined using the uptime, packet loss, latency, CV, MOS and other metrics. The collected metrics are displayed in charts where you can see how they change over time. You can also get information about the number of outages and the periods when the host was in a different state or had varying quality characteristics during a selected period.
Improved monitoring web interface
The web interface, which is available in the Enterprise edition of the program, has been significantly improved. It now allows seeing all monitoring data and statistics though the web without opening a GUI client. The new web interface allows starting and stopping monitoring for hosts and groups.
Improved notifications
In addition to the host state notifications, now it is possible to send notifications when the connection quality changes. You can configure multiple notifications for every event in the updated notification settings dialog in Preferences. For example, you can send e-mail notifications and execute custom actions such as Windows commands, scripts or executables. To reduce the number of notifications, it is possible to group messages into one e-mail within a specified time interval, or group multiple events into one e-mail for every host.
Host timeline and raw ping data exporting
Using the new Timeline view, you can see raw ping replies for a selected period and the host state and quality for the same period. That data is displayed on charts, so you can see how they change over time. If you wish, you can export raw ping data into a CSV file and open it in an external program.
Hosts filtering in reports
The reports configuration now includes a filter that can be used to filter report host members. You may specify that the report should only include the hosts that meet the condition.
Learn more: EMCO Ping Monitor↧
↧
EMCO Ping Monitor 7.0.7 is available
System state overview
There is a new view in the program that provides you with an overview of the current state of the monitored hosts. There you can see the number of the monitored, non-monitored and paused hosts. The same view shows the total number of the monitored hosts in different states (Up and Down) and with a different connection quality (Good, Warning, Bad and Critical). All numbers are clickable, so you can navigate to the hosts with the selected Activity, State or Quality.
Connection quality tracking
In addition to the host state monitoring, the program can now monitor the connection quality for the monitored hosts, so you can see it on screen and get notifications when the connection quality changes. The connection quality is determined using the packet loss, latency percentile and jitter metrics to show the quality as Good, Warning, Bad or Critical.
State and quality monitors
Using the State and Quality Monitors, which are available in the Enterprise edition of the program, you can see the states and the connection quality of all the monitored hosts on a single screen. Those views are designed for control rooms where the monitored hosts should be represented in a compact form while their state and quality are displayed by means of different colors. It is possible to sort and filter the displayed data to show hosts with the required characteristics only.
Determining the host performance and displaying statistics for a selected period
You can select the required period and get information on the host performance and statistics for the selected period. The host performance is determined using the uptime, packet loss, latency, CV, MOS and other metrics. The collected metrics are displayed in charts where you can see how they change over time. You can also get information about the number of outages and the periods when the host was in a different state or had varying quality characteristics during a selected period.
Improved monitoring web interface
The web interface, which is available in the Enterprise edition of the program, has been significantly improved. It now allows seeing all monitoring data and statistics though the web without opening a GUI client. The new web interface allows starting and stopping monitoring for hosts and groups.
Improved notifications
In addition to the host state notifications, now it is possible to send notifications when the connection quality changes. You can configure multiple notifications for every event in the updated notification settings dialog in Preferences. For example, you can send e-mail notifications and execute custom actions such as Windows commands, scripts or executables. To reduce the number of notifications, it is possible to group messages into one e-mail within a specified time interval, or group multiple events into one e-mail for every host.
Host timeline and raw ping data exporting
Using the new Timeline view, you can see raw ping replies for a selected period and the host state and quality for the same period. That data is displayed on charts, so you can see how they change over time. If you wish, you can export raw ping data into a CSV file and open it in an external program.
Hosts filtering in reports
The reports configuration now includes a filter that can be used to filter report host members. You may specify that the report should only include the hosts that meet the condition.
Learn more: EMCO Ping Monitor↧
EMCO Remote Installer 5.3.3 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- Improved compatibility with Microsoft Windows 10 build 1903
- Added compatibility with mail servers that require TLS 1.1 and TLS 1.2 encryption
↧
EMCO Remote Shutdown 6.1.1 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- The program now supports Microsoft Windows 10 build 1903
- Added compatibility with mail servers that require TLS 1.1 and TLS 1.2 encryption
- The maximum operation timeout length is increased from 15 minutes to 24 hours
↧
↧
EMCO WakeOnLan 2.0.5 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- The program now supports Microsoft Windows 10 build 1903
- Added compatibility with mail servers that require TLS 1.1 and TLS 1.2 encryption
↧
EMCO Network Software Scanner 2.0.7 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- The program now supports Microsoft Windows 10 build 1903
↧
EMCO Ping Monitor 7.0.8 is available
Resolved issues
This release contains a set of resolved issues, including most important ones, listed below:
- The web interface in the Enterprise edition cannot be launched on IIS server version less than 10.0
- The charts are failing to load leading to the fatal error in the program when the client time zone has fractional UTC offset
↧
EMCO MSI Package Builder 7.3.6 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- Microsoft Windows 2019 Server operating system is added to the list of target operating systems in the resulting package configuration
- The 'Pin to Taskbar' feature is now supported for PCs running Windows 10 Build 1903
↧
↧
EMCO Network Inventory 5.8.21 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- The Microsoft Windows Server 2019 operating system is now supported
- The inventory scan results logging is more precise
↧
EMCO Ping Monitor 7.1 is available
Response latency tracking
The response latency along with state and quality changes tracking is included to the host statistics for live intervals.
New and improved features
Features below were firstly introduced or significantly improved in this release:
- Significantly improved responsiveness of the program web interface
Resolved issues
This release contains a set of resolved issues, including most important ones, listed below:
- The program fails to import database from version 6 in case it can be no longer launched
- Possible application failure due to critical error when selecting auto-filter row in the Hosts tree view
↧
EMCO MSI Package Builder 7.3.7 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- Improved capturing accuracy of the Live Monitoring technology
Resolved issues
This release contains a set of resolved issues, including most important ones, listed below:
- Fixed incorrect service dependency detection of specific services in complex environments
↧
EMCO Ping Monitor 7.1.2 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- Increased maximum allowed command size when specifying custom actions
Resolved issues
This release contains a set of resolved issues, including most important ones, listed below:
- The link for excluding missing items from filter on the web interface does not work in specific circumstances
- Possible error when loading objects on program startup
↧
↧
EMCO Remote Installer 6.0 is available
Windows compatibility improvements
The program includes several changes to improve its compatibility with the latest builds and preview releases of Windows 10 and Windows Server 2019.
Stability and performance improvements
The performance of remote operations executed in large networks is improved. The client/server communication protocol is optimized to increase the number of clients that can work concurrently with the same server.
Single distribution for all editions
Now all the editions of the program are available as a single installation, so you can easily switch to another edition. To change editions, you need to provide a license key only. The program preserves all your data after you switch editions.
↧
EMCO MSI Package Builder 7.3.8 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- Added compatibility with Windows 10 Build 1909
Resolved issues
This release contains a set of resolved issues, including most important ones, listed below:
- Removed the evaluation message displayed in the integrated help system
↧
EMCO Remote Shutdown 7.0 is available
Windows compatibility improvements
The program includes several changes to improve its compatibility with the latest builds and preview releases of Windows 10 and Windows Server 2019.
Stability and performance improvements
The performance of remote operations executed in large networks is improved. The client/server communication protocol is optimized to increase the number of clients that can work concurrently with the same server.
Single distribution for all editions
Now all the editions of the program are available as a single installation, so you can easily switch to another edition. To change editions, you need to provide a license key only. The program preserves all your data after you switch editions.
Color themes in web reports
The program provides multiple color themes of web reports, so you can select a light, dark or high-contrast theme.
Improved access control
If a network has a complex structure including multiple trusted domains, it is possible to assign permissions for users from other domains.
Learn more: EMCO Remote Shutdown↧
EMCO Remote Installer 6.0.1 is available
Resolved issues
This release contains a set of resolved issues, including most important ones, listed below:
- Fixed time displayed in UTC instead of local time
- Fixed SQL Server database import that fails if there is an error in the settings file
- Patched SQL Server database that may fail under certain conditions
↧
↧
EMCO Remote Installer 6.0.2 is available
Resolved issues
This release contains a set of resolved issues, including most important ones, listed below:
- Fixed time displayed in UTC instead of local time
- Fixed SQL Server database import that fails if there is an error in the settings file
- Patched SQL Server database that may fail under certain conditions
↧
EMCO Ping Monitor 7.2.1 is available
New and improved features
Features below were firstly introduced or significantly improved in this release:
- Added an option that allows selecting principals from all domains in the forest and the trusted domains
Resolved issues
This release contains a set of resolved issues, including most important ones, listed below:
- Fixed a potential memory leak in the service when raw data collecting is enabled
- Fixed a crash on update when connecting to a remote server
- Fixed duplicating of principal names with different SIDs
↧
EMCO Ping Monitor 7.2.2 is available
Resolved issues
This release contains a set of resolved issues, including most important ones, listed below:
- Fixed an error when collecting raw data is disabled
↧